Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
80259 | Solar Energy Materials and Solar Cells | 2010 | 7 Pages |
Aluminum-doped zinc oxide films were deposited at 100 °C on polyethylene terephthalate by radio-frequency magnetron sputtering. The sputtering parameters such as RF power and Argon working pressure were varied from 25 to 125 W and from 1.1 to 0.2 Pa, respectively. The structural properties of as-deposited films were analysed by X-ray diffraction, showing that all the deposited films were polycrystalline, with hexagonal structure and a strong preferred c-axis orientation (0 0 2). Full width at half maximum and grain sizes were around 0.27° and ranged from 24 to 32 nm, respectively. The strain state of the samples was also estimated from X-ray diffraction measurements, obtaining compressive stresses from 0.29 to 0.05 GPa. Resistivity as low as 1.1×10−3 Ω cm was achieved for the film deposited at 75 W and 0.2 Pa, sample that showed a low strain state of −0.06 GPa. High optical transmittance (∼80%) was exhibited when films were deposited at RF powers below 100 W. Band gap energies ranged from 3.36 to 3.39 eV and a refractive index of 1.80±0.05, constant in the visible region, was also obtained.