Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
8026888 | Surface and Coatings Technology | 2014 | 6 Pages |
Abstract
Furnace cycle testing of superalloy 1483 and X4 substrates with high velocity oxygen fuel (HVOF) NiCoCrAlYHfSi bond coatings and air plasma sprayed (APS) yttria-stabilized zirconia (YSZ) top coatings was conducted at 1100 °C in various environments. Average thermal barrier coating (TBC) lifetimes were 5-6 times longer when 100 h cycles were used to simulate base-load power generation operation, compared to the 1 h aero-engine standard cycle. Longer exposure times for 100 h cycles increased the interdiffusion resulting in no clear effects of H2O and CO2 additions on average TBC lifetime for the 1483 substrates, contrary to the results with 1 h cycles where the addition of H2O reduced TBC lifetime. The lower Al content and perhaps the higher Ti content in 1483 compared to X4 resulted in lower TBC lifetimes for 1483. Photo-stimulated luminescence piezospectroscopy (PLPS) and 3D microscopy were used to measure residual stress in the alumina scale and surface roughness, respectively, on specimens with and without a YSZ top coating.
Related Topics
Physical Sciences and Engineering
Materials Science
Nanotechnology
Authors
M.J. Lance, K.A. Unocic, J.A. Haynes, B.A. Pint,