Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements

In order to couple the damage evolution and the stress state of DP steel grades, a new advanced GTN (Gurson–Tvergaard–Needleman) model was developed and implemented into a finite element code. This model is an extension of the original one. It takes into account the plastic anisotropy and the mixed (isotropic + kinematic) hardening of the matrix. Two different methods to compute the void volume fraction were developed and used within the constitutive equations. The first method is new and allows the accurate modeling of the observations of damage initiation and growth in DP steels measured using high-resolution X-ray absorption tomography (Bouaziz et al., 2008 and Maire et al., 2008). The second method is classic and assumes the additive decomposition of the total void volume fraction into a nucleation and a growth part. A parametric study is carried out to assess the effect of the kinematic hardening on some mechanical parameters such as the equivalent plastic strain, the triaxiality and the porosity. The numerical predictions are favorably compared to the experimental results.