Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
80372 | Solar Energy Materials and Solar Cells | 2009 | 10 Pages |
Amorphous and microcrystalline silicon single layers and p–i–n solar cells were produced dynamically using an inline deposition system called “line source”. A highly uniform deposition of thin-film silicon layers with layer-thickness variations of less than ±5% was achieved. Amorphous and microcrystalline silicon single junction solar cells were dynamically fabricated with initial efficiencies of 8.3% and 6.3%, respectively. The dynamic deposition rate of these solar cells is 6.75 nm m/min in case of a-Si:H and 3.3 nm m/min for μc-Si:H. In this work it will be shown that an enhancement of the deposition rate up to 15.6 nm m/min during the i-layer deposition of a-Si:H solar cells has only a weak negative influence on the initial efficiencies of the cells. Further on, the effect of substrate velocity on solar cell characteristics of a-Si:H solar cells is investigated. Finally, a productivity estimation of the line source concept is presented.