Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
8039194 | Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms | 2018 | 7 Pages |
Abstract
Two different isobar separation techniques were tested for the detection of the long-lived fission product 93Zr (T1/2â¯=â¯1.64â¯Â·â¯106â¯a) using Accelerator Mass Spectrometry (AMS), i.e. a passive absorber and a gas-filled magnet, respectively. Both techniques were used in combination with a Time-of-Flight path for the identification of the stable neighboring isotopes 92Zr and 94Zr. The passive absorber was represented by a stack of silicon nitride foils for high flexibility regarding the thickness for optimal isobar separation. Ion beams with a large variety of energies, between 80 and 180â¯MeV, were provided for this experiment by the tandem accelerator at the Maier-Leibnitz Laboratory in Garching, Germany. With these beams, the stopping powers of 93Zr and 93Nb as a function of energy were determined experimentally and compared to the results obtained with the simulation program SRIM. Considerable discrepancies regarding the energy dependence of the two stopping power curves relative to each other were found. The lowest detection limit for 93Zr achieved with the passive absorber setup was 93Zr/Zrâ¯=â¯1â¯Â·â¯10â10. In comparison, by optimizing the gas-filled magnet set-up, 93Nb was suppressed by around six orders of magnitude and a detection limit of 93Zr/Zrâ¯=â¯5â¯Â·â¯10â11 was obtained. To our knowledge, these results represent the lowest detection limit achieved for 93Zr until now.
Keywords
Related Topics
Physical Sciences and Engineering
Materials Science
Surfaces, Coatings and Films
Authors
Karin Hain, Boyana Deneva, Thomas Faestermann, Leticia Fimiani, José Manuel Gómez-Guzmán, Dominik Koll, Gunther Korschinek, Peter Ludwig, Victoria Sergeyeva, Nicolas Thiollay,