| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 8044603 | Vacuum | 2018 | 19 Pages |
Abstract
Dissimilar joining of copper (C10300) to AISI-304 Stainless Steel (SS) sheets was performed using Electron Beam Welding (EBW) process. EBW was performed for two weld conditions such as with beam oscillation and without beam oscillation. X-ray Computed Tomography (XCT) technique was used for three-Dimensional (3D) visualization and quantification of porosity in the weld region. It was observed that the application of beam oscillation resulted in less porosity and the average pore size was found to be smaller as compared to without beam oscillation condition. Also, pores were found to be uniformly distributed in the weld incase of with beam oscillation as compared to without beam osicllaition condition. Further, it was observed that there exists an optimum beam oscillation diameter beyond which there is no positive effect of beam oscillation in controlling the porosity formation in the weld joint.
Keywords
Related Topics
Physical Sciences and Engineering
Materials Science
Surfaces, Coatings and Films
Authors
Jyotirmaya Kar, Soumitra Kumar Dinda, Gour Gopal Roy, Sanat Kumar Roy, Prakash Srirangam,