Investigation on the fracture behavior of titanium grade 2 sheets by using the single point incremental forming process

The objective of the present research work is to study the fracture behaviour (void coalescence) of titanium grade 2 sheets using the Single Point Incremental Forming (SPIF) process and its dependence on various process parameters. The importance of tool diameter on the fracture behavior of the titanium grade 2 was investigated and it was found that the maximum deformation fracture strain was observed for the highest (12 mm) tool diameter. The Forming Limit Diagram (FLD) is plotted for each speed of titanium grade 2 sheets. The variation of fracture behaviour with respect to speed was examined and it showed that this was the maximum for higher speed of 600 rpm spindle speed. The void coalescence analysis was carried out using AutoCAD software, and the strain triaxiality was determined. The Energy Dispersive X-ray Spectroscopy (EDS) analysis was investigated to confirm the elemental composition of titanium grade 2 sheets.