Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
8053099 | Applied Mathematical Modelling | 2013 | 24 Pages |
Abstract
The vortex formation and shedding behind bluff structures is influenced by fluid flow parameters such as, Reynolds number, surface roughness, turbulence level, etc. and structural parameters such as, mass ratio, frequency ratio, damping ratio, etc. When a structure is flexibly mounted, the Kármán vortex street formed behind the structure gives rise to vortex induced oscillations. The control of these flow induced vibrations is of paramount practical importance for a wide range of designs. An analysis of flow patterns behind these structures would enable better understanding of wake properties and their control. In the present study, flow past a smooth circular cylinder is numerically simulated by coupling the mass, momentum conservation equations along with a dynamical evolution equation for the structure. An active flow control strategy based on zero net mass injection is designed and implemented to assess its efficacy. A three actuator system in the form of suction and blowing slots are positioned on the cylinder surface. A single blowing slot is located on the leeward side of the cylinder, while two suction slots are positioned at an angle α = 100°. This system is found to effectively annihilate the vortex induced oscillations, when the quantum of actuations is about three times the free stream velocity. The dynamic adaptability of the proposed control strategy and its ability to suppress vortex induced oscillations is verified. The exact quantum of actuation involved in wake control is achieved by integrating a control equation to decide the actuator response in the form of a closed loop feed back system. Simulations are extended to high Reynolds number flows by employing eddy viscosity based turbulence models. The three actuator system is found to effectively suppress vortex induced oscillations.
Related Topics
Physical Sciences and Engineering
Engineering
Computational Mechanics
Authors
K. Muralidharan, Sridhar Muddada, B.S.V. Patnaik,