Test methods for characterising the water distribution from irrigation sprinklers: Design, evaluation and uncertainty analysis of an automated system

An automated system for indoor testing of irrigation sprinklers was developed and evaluated. The system was designed to test single sprinklers with jet lengths up to 18 m. The tests involve the use of 36 collectors (catch-cans) spaced at 0.5 m intervals along the jet radius. A single pressure transducer coupled to a manifold equipped with solenoid valves was employed to sequentially scan the water level in each collector. Radial application rates were determined based on water level measurements. Results obtained using the automated system were compared with those obtained using manual operation using mass measurements. Uncertainty analysis of the manual method was compared with the automated system. The automated system was found to be as reliable as the manually operated system for testing sprinklers. Although minor differences in the application rates measured by the two methods were detected, they did not cause appreciable differences in the distribution uniformity indicators used. The results presented will provide useful baseline for uncertainty analysis in irrigation sprinkler testing.