Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
8055827 | Acta Astronautica | 2018 | 24 Pages |
Abstract
In this study, novel nanocomposites were created by incorporation of Silsesquioxane containing eight glycidylether groups (octa-POSS) into a cycloaliphatic epoxy cured by an anhydride. The developed resin system, with different nanoparticle concentrations, was used on the outer layers of an ultra-thin CFRP structure in order to provide better environmental resistance to the environment of low Earth orbit (LEO) which was tested in a ground-simulation facility. The developed resins were subjected to space-like degrading factors and their response to corrosion, radiation and elevated temperatures was monitored by mass loss, together with measuring changes in surface chemistry (ATR-FTIR), functionality development (contact angle measurement and XPS), roughness (scanning laser microscopy) and morphology (SEM). The influence of increasing octa-POSS content on thermo-mechanical properties was measured with DMTA and the strength and modulus of elasticity were determined by flexural test. The addition of octa-POSS in any loading improves the environmental resistance, however, the most significant retention of mass and mechanical and surface properties after space-like exposure was observed in the 20Â wt% octa-POSS reinforced cycloaliphatic epoxy. The results presented here may contribute to the development of novel class of nanocomposites which can offer an extended service life in LEO.
Related Topics
Physical Sciences and Engineering
Engineering
Aerospace Engineering
Authors
Agnieszka Suliga, Ewa M. Jakubczyk, Ian Hamerton, Andrew Viquerat,