The phase separation concept condensation heat transfer in horizontal tubes for low-grade energy utilization

This paper reports condensation heat transfer in a horizontal tube with a 14.81 mm inside diameter and a 1200 mm heat transfer length, by using the phase separation concept. The hollow mesh cylinder was formed by packaging two layers of mesh screen surface. The outer layer had the pore size of 76 μm. This invention constructs a multiscale condenser tube. The modulation of stratified flow and annular flow was focused on. Liquid was held within the mesh cylinder to increase the vapor covered tube wall surface to enhance the heat transfer for stratified flows. For annular flows, liquid droplets in the vapor core were captured by the mesh screen surface to increase the vapor void fractions near the tube wall, enhancing the hat transfer. The measurements showed that the heat transfer coefficients could be more than two times of those in the bare tube. The total thermal resistance was decreased by 45.6%, maximally. The heat transfer enhancement ratios were increased with the vapor mass fluxes, Gxin, for the condensation flow along the whole tube length. A pressure analysis explained the increased heat transfer trend. The increment of heat transfer enhancement ratios was suppressed with a liquid flow part in the tube.