Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
808290 | Theoretical and Applied Fracture Mechanics | 2007 | 18 Pages |
The objective of this work is to develop and validate a model that predicts the reference soil shrinkage curve, that is one without crack volume contribution, as a necessary preliminary step in future estimation of soil crack volume from soil shrinkage data. Current soil shrinkage models are based on the approximation of soil shrinkage data by some a priori taken mathematical expressions and justified by the fitting of their parameters to the data. However, the crack volume entering the data is not single valued and depends on shrinkage conditions. Unlike that the reference shrinkage curve is single valued. For soils with sufficiently high clay content when there are no large pores (lacunar pores) inside the intra-aggregate clay, the reference shrinkage curve is derived from the assumption of the rigid superficial (interface) layer of aggregates with changed pore-size range and distribution compared with the intra-aggregate matrix. This consideration is based on accounting for contributions of the interface aggregate layer and intra-aggregate matrix to the soil volume and water content during shrinkage. The reference shrinkage curve is predicted by eight fundamental physical immediately measured parameters of (i) the intra-aggregate matrix (including clay content); (ii) the aggregate structure; and (iii) the mean silt-sand grain size or mean interface layer thickness. The model was validated using the data for eight soils. In addition to the major potential application for estimating a soil crack volume, the model explains differences between the observed shrinkage curves of soil and pure clay, and it can have other numerous applications.