Multifactorial comparison of photobioreactor geometries in parallel microalgae cultivations

Efficient photosynthetic biomass production in a high rate pond (HRP) or a photobioreactor (PBR) represents the first step of microalgae platforms for the production of renewable fuels, animal feeds and a diverse range of high value products. This study analyses the interplay between solar energy input, ambient temperature and system surface area to volume (SA:V) ratio in terms of photosynthetic performance (yield, areal and volumetric productivity, photon conversion efficiency). Ten pilot scale trials were conducted under subtropical conditions using 2 microalgae strains (Chlorella sorokiniana and Chlorella sp.) in 5 different cultivation system geometries: HRPs, flat panel PBRs (0.75 m and 1.5 m high) and tubular PBRs (0.74 m and 1.49 m high). The evaluation of culture temperature and biomass productivity response to solar irradiance in the five production systems suggests that the optimal SA:V ratio range lies between 43-73 m2 m− 3 for C. sorokiniana in non-cooled systems regardless of system geometry under the conditions tested. The overall photosynthetic performance at higher SA:V ratios was improved for Chlorella sp. using temperature regulation. The highest observed daily photon conversion efficiency (PCE) was 4.44% (based on illuminated PBR surface area and total solar spectrum) in the high flat panel PBR using C. sorokiniana (40.8 g m− 2 d− 1, 0.23 g L− 1 d− 1). The highest achieved mean PCE (based on illuminated PBR surface area and total solar spectrum) was 2.5% in the low tubular PBR with Chlorella sp. (24.9 g m− 2 d− 1, 0.43 g L− 1 d− 1). The trial data provides important design principles to help fast track systems optimisation for near optimal sub-tropical conditions.