The high strain-rate behaviour of selected tissue analogues

The high strain-rate response of four readily available tissue simulants has been investigated via plate-impact experiments. Comparison of the shock response of gelatin, ballistic soap (both sub-dermal tissue simulants), lard (adipose layers) and Sylgard® (a potential brain simulant) allowed interrogation of the applicability of such monolithic tissue surrogates in the ballistic regime. The gelatin and lard exhibited classic linear Hugoniot equations-of-state in the US–uP plane; while for the ballistic soap and Sylgard® a polymer-like non-linear response was observed. In the P/σX–v/v0 plane there was evidence of separation of the simulant materials into distinct groups, suggesting that a single tissue simulant is inadequate to ensure a high-fidelity description of the high strain-rate response of complex mammalian tissue. Gelatin appeared to behave broadly hydrodynamically, while soap, lard and Sylgard® were observed to strengthen in a material-dependent manner under specific loading conditions at elevated shock loading pressures/stresses. This strengthening behaviour was tentatively attributed to a further polymeric-like response in the form of a re-arrangement of the molecular chains under loading (a steric effect). In addition, investigation of lateral stress data from the literature showed evidence of operation of a material-independent strengthening mechanism when these materials were stressed above 2.5–3.0 GPa, tentatively linked to the generically polymeric-like underlying microstructure of the simulants under consideration.

Graphical abstractFigure optionsDownload full-size imageDownload high-quality image (104 K)Download as PowerPoint slide