Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
8116125 | Renewable and Sustainable Energy Reviews | 2015 | 20 Pages |
Abstract
Climate change mainly due to the release of greenhouse gases into the atmosphere is getting alarming dimensions. CO2 capture from point source emissions is a promising solution, lately receiving significant attention. In particular, chemical absorption of CO2 from flue gases using aqueous solvents (mainly alkanolamines) is a well-known process, studied in detail. Modern research aims to optimize this process, maximizing the absorption rates and minimizing the parasitic but not negligible energy requirements for solvent regeneration. This type of analysis requires considering the coupling of the absorption with the power plant operation or other source of CO2. The operation fluctuations and disturbances, such as load variations or start-up mode have to be reflected in the process modeling, justifying the emerging need for dynamic modeling. However, dynamic analysis is not always realizable as dynamic experimental data are scarce in order to enable accurate model validation. Thus, steady state models are still convenient for certain cases. The current work provides a short description of the main modeling approaches followed and enlists representative steady state and dynamic models found in literature. Finally, a primary comparison is performed for some comparable models that used the same set of experimental data for model validation.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
I.P. Koronaki, L. Prentza, V. Papaefthimiou,