Article ID Journal Published Year Pages File Type
8156807 Journal of Magnetism and Magnetic Materials 2015 4 Pages PDF
Abstract
In this work, the 〈1 0 0〉 directional solidified feedstock slabs were used to produce the rolled Fe-Ga sheets, and sharp Goss orientation was developed in the 0.3 mm sheets after annealing processes. The area fraction of Goss grains in the annealed binary Fe-Ga sheets approached to 62.4% without abnormal grain growth, accompanied with a maximum magnetostriction (λ//−λ⊥) of 199 ppm. The addition of only 0.1 at% NbC notably promoted the abnormal Goss grain growth without sulfur annealing, and large single-crystal-like grains, up to several centimeters, were obtained with few island-like grains after sulfur annealing and final Ar/H2 annealing processes. High magnetostriction (λ//−λ⊥) of 245 ppm with little deviation was achieved in the (Fe83Ga17)99.9(NbC)0.1 sheets, and a large magnetostrictive strain (λ//) up to 243 ppm under no pre-stress was observed with an applied magnetic field along the rolling direction.
Related Topics
Physical Sciences and Engineering Physics and Astronomy Condensed Matter Physics
Authors
, , , , ,