| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 821145 | Composites Science and Technology | 2011 | 10 Pages |
A model is presented for prediction of the fracture energy of ceramic–matrix composites containing dispersed metallic fibres. It is assumed that the work of fracture comes entirely from pull-out and/or plastic deformation of fibres bridging the crack plane. Comparisons are presented between these predictions and experimental measurements made on a commercially-available composite material of this type, containing stainless steel (304) fibres in a matrix predominantly comprising alumina and alumino-silicate phases. Good agreement is observed, and it’s noted that there is scope for the fracture energy levels to be high (∼20 kJ m−2). Higher toughness levels are both predicted and observed for coarser fibres, up to a practical limit for the fibre diameter of the order of 0.5 mm. Other deductions are also made concerning strategies for optimisation of the toughness of this type of material.
