Effect of silica particles modified by in-situ and ex-situ methods on the reinforcement of silicone rubber

•In-situ and ex-situ methods were applied to modify silica particles.•In-situ method was more beneficial to preparing silica particles with high BET surface area.•Silicone rubber filled with in-situ modified silica exhibits excellent mechanical and thermal properties.

In-situ and ex-situ methods were applied to modify silica particles in order to investigate their effects on the reinforcement of silicone rubber. Surface area and pore analyzer, laser particle size analyzer, Fourier-transform infrared spectroscopy (FTIR), contact-angle instrument, and transmission electron microscope (TEM) were utilized to investigate the structure and properties of the modified silica particles. Dynamic mechanical thermal analyzer (DMTA) was employed to characterize the vulcanizing behavior and mechanical properties of the composites. Thermogravimetric analysis (TGA) was performed to test the thermal stability of the composites. FTIR and contact angle analysis indicated that silica particles were successfully modified by these two methods. The BET surface area and TEM results reflected that in-situ modification was more beneficial to preparing silica particles with irregular shape and higher BET surface area in comparison with ex-situ modification. The DMTA and TGA data revealed that compared with ex-situ modification, the in-situ modification produced positive influence on the reinforcement of silicone rubber.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide