| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 829868 | Materials & Design (1980-2015) | 2013 | 9 Pages |
•The process parameters were optimized by Taguchi technique.•The plate position plays an important role on the lap-shear fracture load.•In the lap-shear tensile tests, two different fracture morphologies were observed.•The maximum lap-shear fracture load was acquired with 1500/2/2.65/10 welding parameters.
In this study, the effect of plate positioning on mechanical properties of dissimilar lap joints was investigated by friction stir spot welding (FSSW) process. The determination of the welding parameters plays an important role for the weld strength. For the effective use of the dissimilar aluminum joints, the FSSW must have an adequate strength. The quality of the joint was evaluated by examining the characteristics of the joining efficiency as a result of the lap-shear tensile test. Four process parameters were selected: the tool rotation speed, dwell time, tool plunge depth, and tilt angle.The process parameters were optimized by Taguchi technique based on Taguchi’s L9 orthogonal array. The optimum welding process parameters were predicted, and their percentage of contribution was estimated by applying the signal-to-noise ratio and analysis of variance. The experimental results showed that the positioning of the plates played an important role on the strength of the joints. Finally, the results were confirmed by further experiments.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
