| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 831411 | Materials & Design (1980-2015) | 2011 | 6 Pages |
This investigation was performed to compare the simulation and experimental results of the fatigue crack growth rates and behaviors of the 7050-T7451 aluminum alloy by nanoseconds laser shock processing (LSP). Forman–Newman–deKoning (FNK) model embedded in the Franc2D/L software was utilized to predict fatigue crack growth rate, which was conducted to weigh the stress intensity factor (SIF) changing on the surface cracks. LSP induced high compressive residual stresses that served to enhance fatigue properties by improving the resistance against fatigue crack initiation and propagation. The circulating times of crack growth obtained from the simulation and experimental values indicated a slower fatigue crack growth rates after LSP. The relationships between the elastic–plastic materials crack growth rates and the SIF changing after LSP are resolved.
Research highlights► Compressive residual stress generated by LSP in crack surface reduces the tensile stress level. ► The reduction in striation spacing indicates a slower fatigue crack growth rates after LSP. ► The effective stress intensity factor is lower than that of the non-LSP case. ► Reasonably good agreements have been obtained from both the simulation and experiment results.
