Influence of matrix structure on the fatigue properties of an alloyed ductile iron

Rotary bending fatigue tests were conducted on ductile iron containing 1.25 wt% nickel, 1.03 wt% copper and 0.18 wt% molybdenum with various matrix structures. Several heat treatments were applied to obtain ferritic, pearlitic/ferritic, pearlitic, tempered martensitic, lower and upper ausferritic structures in the matrix of a pearlitic as-cast alloyed ductile iron. The tensile properties (ultimate tensile strength, 0.2% yield strength and percent elongation), the hardness and the microstructures of the matrixes were also investigated in addition to fatigue properties. Fractured surfaces of the fatigue specimens were examined by the scanning electron microscope. The results showed that the lowest hardness, tensile and fatigue properties were obtained for the ferritic structure and the values of these properties seemed to increase with rising pearlite content in the matrix. While the lower ausferritic structure had the highest fatigue strength, the upper ausferritic one showed low fatigue and tensile properties due to the formation of the second reaction during the austempering process.