Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
846684 | Optik - International Journal for Light and Electron Optics | 2016 | 8 Pages |
Abstract
A freeform lens with inclined reflector coated with Al-Ni-Y thin film metallic glass (TFMG) was proposed to improve the irradiance and uniformity of an ultraviolet light-emitting diode (UV-LEDs) lithography system. Polydimethylsiloxane (PDMS) was adopted as lens materials. The lens mold was fabricated by 3-D printing method. Besides, a recipe of TFMG with 88% reflectivity was determined to enhance the exposure performance. The results show the average irradiance and uniformity with 60° inclined reflector were 8.7 mW/cm2 and 82%, respectively. The system with 60° inclined reflector layer can achieve 97.5% average normalized cross correlation (NCC) between the simulation and experimental measurement.
Related Topics
Physical Sciences and Engineering
Engineering
Engineering (General)
Authors
C.T. Pan, T.L. Yang, Y.C. Chen, C.M. Chang, J.H. Hsu, J.C. Huang,