A synthesis technique of single square loop frequency selective surface at terahertz frequency

In this paper, we have explored and extended the use of frequency selective surface towards the terahertz regime of the electromagnetic spectrum where interesting applications such as imaging, sensing and communication exist. We have discussed a synthesis technique to design the single square loop frequency selective surface (SSLFSS) at 150 and 300 GHz which have found suitable application in the fast analysis and fabrication of the frequency selective surface. Moreover, the analytical results have been supported by the CST Microwave Studio and Ansoft HFSS commercial simulators. We have discussed the angular insensitivity of the SSLFSS at 150 GHz as well as 300 GHz. However, the specific problems arise at terahertz frequencies as compared to the radio and microwave frequencies are the ohmic losses. The proposed analysis has been extended from 100 GHz to 350 GHz to discuss the ohmic and dielectric losses. We have also discussed the other important issues which are very much significant in the terahertz regime of the spectrum such as skin depth and surface roughness.