The SEM & AFM Images of MEH-PPV Films below CLA Region

Poly [2-methoxy-5--ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) is an example of conducting polymer that used to fabricate an organic light emitting diode (OLED). The surface roughness and homogeneity of MEH-PPV film is then investigated by using Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM). The luminescence of the device was effect by the surface roughness of the film. The standard spin coating technique is used to produce uniform thin film onto large area. MEH-PPV can be easily dissolved in non-aromatic (chloroform) and aromatic (toluene) solvents to exhibit different optical, structural and electrical properties. The MEH-PPV solutions in the two types of solvents were prepared at solution concentration of 1 mgml-1 to 8 mgml-1 and 1 mgml-1, 5 mgml-1 and 8 mgml-1in chloroform and toluene respectively. There are three regimes derived from the viscosity measurement. These regimes are measured related to concentration of loose aggregation, (CLA). The regime are cCLA and c>CLA. The MEH-PPV solutions used in this work is classified in the regime of c