The Design and Realization for a Multiplex Time Sequence Controller

In order to meet the demand of activating several devices at different moments, a multiplex time sequence controller is developed in this paper. When the controller receives the trigger signal for starting, the time sequential control circuit module, consisting of the microcontroller and the FPGA, it can generate a delay trigging signal according to the preset delay value, which will activate the testing device after being driven. The delay value is import by the computer or the dial on the panel. The real firing results show that the time sequence controller can realize the delay of 20-channel independently, one of which is able to be adjustable within 0∼10 s, the maximum amplitude of output delay trigging signal is 12 V, the width of the signal is 5ms and the error of the delay time is less than 2colons. The multiplex time sequence controller can satisfy the requirements of technical specifications of testing system in conventional shooting range, and it can meet the demand of activating several testing devices operating at different moments.