Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
866211 | Biosensors and Bioelectronics | 2016 | 9 Pages |
•A silicon nanowire biosensor with novel molecular gate control is developed.•Amine-based chemical binding approach in the surface modification is highlighted.•Electrical detection of Dengue Virus (DENV) DNA is discussed.•LOD as low as 2.0 fM concentration with high sensitivity of 45.0 µA M−1 is reported.
In this paper, a silicon nanowire biosensor with novel molecular gate control has been demonstrated for Deoxyribonucleic acid (DNA) detection related to dengue virus (DENV). The silicon nanowire was fabricated using the top–down nanolithography approach, through nanostructuring of silicon-on-insulator (SOI) layers achieved by combination of the electron-beam lithography (EBL), plasma dry etching and size reduction processes. The surface of the fabricated silicon nanowire was functionalized by means of a three-step procedure involving surface modification, DNA immobilization and hybridization. This procedure acts as a molecular gate control to establish the electrical detection for 27-mers base targets DENV DNA oligomer. The electrical detection is based on the changes in current, resistance and conductance of the sensor due to accumulation of negative charges added by the immobilized probe DNA and hybridized target DNA. The sensitivity of the silicon nanowire biosensors attained was 45.0 µA M−1, which shows a wide-range detection capability of the sensor with respect to DNA. The limit of detection (LOD) achieved was approximately 2.0 fM. The demonstrated results show that the silicon nanowire has excellent properties for detection of DENV with outstanding repeatability and reproducibility performances.