Do Textiles Impact DXA Bone Density or Body Composition Results?

External artifacts can confound dual-energy X-ray absorptiometry (DXA) measurements. It is often accepted that garments free of metal do not affect DXA results; however, little data exist in this regard. It is plausible that some textiles absorb radiation and thereby alter DXA results. We hypothesized that some dense or synthetic textiles, for example, reflective materials, might alter DXA-measured bone and soft tissue mass. Hologic and GE Lunar spine phantoms and a Bioclinica prototype total body phantom were imaged on a GE Lunar iDXA and Prodigy densitometer. Each phantom was scanned 10 times to establish mean values. Subsequently, 2 layers of various fabrics were placed over the entire top surface of the phantom, and 10 scans were performed without repositioning. Samples of natural, synthetic, or embellished fabric (including those with reflective material) and of varying thickness were used. Wilcoxon signed rank tests were used to compare the means between bare phantom and textile-covered phantom. Significant differences were demonstrated often, depending on the scanner, phantom, and textile used. A polyester fabric with reflective strip consistently altered measurements. For example, this fabric increased measured mean lumbar spine bone mineral density and total body bone mineral content by 0.008 g/cm2 and 3.6 g, respectively (p < 0.01). Similarly, mean total body fat decreased (−173 g) and lean mass increased (+213 g; p < 0.01). Fat and lean mass were also affected by metallic thread, wool, blend denim, and shiny polyester (p < 0.05), and lean mass was affected by cotton denim and sweatshirt material (p < 0.0003). In conclusion, textiles can affect DXA-measured bone mineral density and body composition results. Even small amounts of reflective material could alter mass measurements by ~25% of the least significant change. Clothing made of dense textiles (e.g., wool and denim) or those with reflective material and metallic thread should be avoided during DXA scanning.