Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
876834 | Medical Engineering & Physics | 2009 | 8 Pages |
The paper presents a theory of fixation failure and loosening in cemented total hip prostheses and proceeds to investigate this using an experimentally validated finite element model and two prosthesis types, namely the Charnley and the C-Stem. The study investigates the effects of retroversion torque occurring at heel-strike in combination with a loss of proximal cement/bone support and distal implant/cement support with a good distal cement/bone interface. A 3D finite element model was validated by comparison of femoral surface strains with those measured in an in vitro experimental simulation using an implanted Sawbone femur loaded in the heel-strike position and including a simplified representation of muscle forces. Results showed that the heel-strike position applies a high retroversion torque to the femoral stem that when combined with proximal debonding of the cement/bone interface and distal debonding of the implant/cement interface increases the strain transfer to the cement that may ultimately lead to the breakdown of the cement mantle leading on to osteolysis and loosening of the prostheses. Experimental fatigue testing of the implanted Charnely stem in a Sawbone femur produced cracks within the cement mantle that were located in positions of maximum stress supporting the finite element analysis results and theory of failure.