Critical specific stream power in gravel-bed rivers

Experiments with marked pebbles were carried out on different sized rivers of the Belgian Ardenne (catchment areas varying from less than 1 km2 to 2700 km2). Specific stream power required to cause bedload movement was evaluated and critical values were obtained. Three types of relationship between critical specific stream power (ω0) and grain size (D) were established. The values for ω0 in the largest river (the Ourthe) were the lowest and were close to the values obtained for mountainous rivers carrying large boulders. In medium sized rivers (catchment area between 40 and 500 km2), the critical unit stream power was higher. It is likely that it is due to the bedform's greater resistance. This resistance would use up some of the energy that can cause movement and transport of bedload. The amount of resistance of the bedform can be expressed as bedform shear stress (τ″), determined by the relationship between grain shear stress (τ′-that determines movement and transport of the bedload) and the total shear stress (τ). This ratio varies between 0.4 and 0.5 in the medium sized rivers, compared to 0.7 in the Ourthe. In headwater streams (less than 20 km2), there is greater loss of energy due to bedform resistance (τ′/τ<0.3). Critical specific stream power is higher in this third type of river than in the other two.