Studies on the cure and mechanical properties of blends of natural rubber with dichlorocarbene modified styrene-butadiene rubber and chloroprene rubber

This paper focused on the comparative evaluation of cure characteristics and mechanical properties of blends of natural rubber with dichlorocarbene modified styrene-butadiene rubber and chloroprene rubber with different blend composition. It was found that the Mooney scorch time and cure index shows a negative deviation from the calculated value based on the interpolation between the two component elastomers. However for the blends, modulus and hardness show a positive deviation. The mechanical properties of NR/DCSBR blend are higher than that of NR/CR blends. Flammability, oil and ozone resistance of the blend showed that as the NR content in the blend increases these properties were decreases and also NR/DCSBR blend showed excellent thermal, oil and ozone resistance than that of NR/CR in entire blend ratios. The mechanical properties, modulus and hardness were also investigated after oil immersion. The changes in mechanical properties were correlated with variation in cross-link density estimated from stress-strain and swelling behavior.