Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
9637398 | Proceedings of the Combustion Institute | 2005 | 7 Pages |
Abstract
Characteristics and structure of nominally non-premixed flames of natural gas are investigated using a burner that employs simultaneously two distinct features: fuel and oxidiser direct injection, and inverse fuel and oxidiser delivery. At low exit velocities, the result is an inverse diffusion flame that has been noted in the past for its low NOx emissions, soot luminosity, and narrow stability limits. The present study aimed at extending the burner operating range, and it demonstrated that the inverse flame exhibits a varying degree of partial premixing dependent on the discharge nozzle conditions and the ratio of inner air jet and outer fuel jet velocities. These two variables affect the flame length, temperature distributions, and stability limits. Temperature measurements and Schlieren visualisation show areas of enhanced turbulent mixing in the shear region and the presence of a well-mixed reaction zone on the flame centreline. This reaction zone is enveloped by an outer diffusion flame, yielding a unique double-flame structure. As the fuel-air equivalence ratio is decreasing with an increase in the inner jet velocity, the well-mixed reaction zone extends considerably. These findings suggest a method for establishing a flame of uniform high temperature by optimising the coaxial nozzle geometry and flow conditions. The normalised flame length is decreasing exponentially with the air/fuel velocity ratio. Measurements demonstrate that the inverse flame stability limits change qualitatively with varying degree of partial premixing. At the low premixing level, the flame blow-out is a function of the inner and outer jet velocities and the nozzle conditions. The flame blow-out at high degree of partial premixing occurs abruptly at a single value of the inner air jet velocity, regardless of the fuel jet velocity and almost independent of the discharge nozzle conditions.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Engineering (General)
Authors
Andrzej Sobiesiak, Jamie C. Wenzell,