Article ID Journal Published Year Pages File Type
9699747 Sensors and Actuators A: Physical 2005 7 Pages PDF
Abstract
Electrostatically-driven Ni curl-up microcantilever probes, which can be applied to new MEMS probe cards with contact-switching function, have been developed. MEMS probe cards are requisite to higher pad-density and smaller pad-pitch chips, and are effective in high frequency testing. If a probe card consists of an array of actuator-integrated microprobes, it could be applied to next-generation testing, for instance, a new wafer-level test/burn-in. This can be achieved as the microprobes can be used for the direct switching of the contact to reduce the number of the I/O lines of the probe card. We have designed arrays of Ni curl-up microcantilevers with a rolling-contact touch-mode electrostatic actuator and developed a micromachining process which includes the electroplating deposition of two layers having different internal stress and etching of the Al sacrifice layer. The fabricated cantilevers with a thickness of 1.0 μm and a width of 50 μm have successfully been driven at a pull-in voltage of approximately 100 V. From the disconnection force of the fritting contact between a Ni probe and an Al film, it is estimated that the fritting contact could be disconnected by applying voltages less than 100 V.
Related Topics
Physical Sciences and Engineering Chemistry Electrochemistry
Authors
, , , ,