Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
9703590 | International Journal of Adhesion and Adhesives | 2005 | 5 Pages |
Abstract
A polyether, moisture curable, polyurethane resin was used as an adhesive on plastic and aluminium substrates, in order to investigate the influence of the surface properties on adhesion. The curing kinetics of the adhesive, in controlled temperature and humidity conditions, was evaluated and an elastomeric product was obtained after curing. The surface properties of the cured resin and of the different substrates (PPO/PA6 blend, polypropylene and aluminium) were evaluated and compared by using a contact angle technique. Adhesion measurements were performed using single-lap joints; the strength values obtained were correlated to the structure of the adhesive and to the surface treatments performed on the substrates.
Related Topics
Physical Sciences and Engineering
Engineering
Mechanical Engineering
Authors
Giulio Malucelli, Aldo Priola, Franco Ferrero, Andrea Quaglia, Mariaenrica Frigione, Cosimo Carfagna,