Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
9812798 | Thin Solid Films | 2005 | 7 Pages |
Abstract
Tribological testing of DLC films was conducted using a rotating type ball on a disk friction tester in a dry chamber. This study made use of four kinds of mating balls that were made with stainless steel but subjected to diverse annealing conditions in order to achieve different levels of hardness. In all load conditions using martensite mating balls, the test results demonstrated that the friction coefficient was lower when the mating materials were harder. The high friction coefficient found in soft martensite balls appeared to be caused by the larger contact areas. Measuring the wear track of both the DLC films and the mating balls revealed a similar tendency compared to the results of friction coefficients. The wear track on the mating balls indicated that a certain amount of material transfer occurs from the DLC film to the mating ball during the high friction process. Raman spectra analysis showed that the transferred materials were a kind of graphite and that the contact surface of the DLC film seemed to undergo a phase transition from carbon to graphite during the high friction process.
Related Topics
Physical Sciences and Engineering
Materials Science
Nanotechnology
Authors
Byung Chul Na, Akihiro Tanaka,