Use of ion beam analysis techniques to characterise iron corrosion under water radiolysis

The aim of this paper is to study the effect of water radiolysis under 12 MeV proton irradiation on the corrosion behaviour of pure iron. Oxygen and hydrogen playing a crucial role during the corrosion process have been specifically investigated. Heavy desaerated water (enriched at 99.9% in D) was also used to determine the origin of hydrogen at the iron surface. Proton irradiations were performed at the CERI cyclotron in Orléans. Both sides of the Fe foil (respectively in contact with air and with water) were analysed with ion beam techniques: alpha Rutherford backscattering spectrometry was used to profile oxygen, elastic recoil detection analysis has allowed to profile hydrogen. The use of D2O gives evidence that the hydrogen concentration present on the water face could originate from wet air. In addition, in case of the aerated deionised H2O media, it is shown that the irradiation process induces a strong corrosion. Scanning electron microscopy experiments confirm the formation of oxide precipitates.