Organic-resistant screen-printed graphitic electrodes: Application to on-site monitoring of liquid fuels

•Organic-resistant screen-printed graphitic electrodes (SPGE) for (bio)fuels.•Screen-printing of conductive and insulator inks on thin polyester substrate.•Continuous detection of antioxidants in electrolyte with 99% v/v ethanol.•SPGE coupled with batch-injection analysis allows over 200 injections (100 μL).•Similar results to GC and HPLC analyses of biodiesel and aviation jet fuels.

This work presents the potential application of organic-resistant screen-printed graphitic electrodes (SPGEs) for fuel analysis. The required analysis of the antioxidant 2,6-di-tert-butylphenol (2,6-DTBP) in biodiesel and jet fuel is demonstrated as a proof-of-concept. The screen-printing of graphite, Ag/AgCl and insulator inks on a polyester substrate (250 μm thickness) resulted in SPGEs highly compatible with liquid fuels. SPGEs were placed on a batch-injection analysis (BIA) cell, which was filled with a hydroethanolic solution containing 99% v/v ethanol and 0.1 mol L−1 HClO4 (electrolyte). An electronic micropipette was connected to the cell to perform injections (100 μL) of sample or standard solutions. Over 200 injections can be injected continuously without replacing electrolyte and SPGE strip. Amperometric detection (+1.1 V vs. Ag/AgCl) of 2,6-DTBP provided fast (around 8 s) and precise (RSD = 0.7%, n = 12) determinations using an external calibration curve. The method was applied for the analysis of biodiesel and aviation jet fuel samples and comparable results with liquid and gas chromatographic analyses, typically required for biodiesel and jet fuel samples, were obtained. Hence, these SPGE strips are completely compatible with organic samples and their combination with the BIA cell shows great promise for routine and portable analysis of fuels and other organic liquid samples without requiring sophisticated sample treatments.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide