| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1163412 | Analytica Chimica Acta | 2015 | 9 Pages |
•Modification of pencil graphite with over-oxidized PEDOT nanofibers was performed.•The prepared electrodes were used in the voltammetric determination of uric acid.•The over-oxidation potential and time has a prominent effect on the responses.•A very high peak separation (463 mV) was obtained between ascorbic and uric acids.•Analytical application of the electrodes was successfully tested in real samples.
In this study, we have performed the preparation of over-oxidized poly(3,4-ethylenedioxythiophene) nanofibers modified pencil graphite electrode (Ox-PEDOT-nf/PGE) to develop a selective and sensitive voltammetric uric acid (UA) sensor. It was noted that the over-oxidation potential and time had a prominent effect on the UA response of the Ox-PEDOT-nf/PGE. Characterizations of PEDOT-nf/PGE and Ox-PEDOT-nf/PGE have been performed by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The highest voltammetric response of UA was obtained at pH 2.0. A linear relationship between the concentration of UA and oxidation peak currents was observed in the concentration range of 0.01–20.0 μM. The detection limit (1.3 nM according to S/N = 3) and reproducibility (RSD: 4.6 % for N:10) have also been determined. The effects of different substances on the determination of UA have been investigated. A very high peak separation value of 423 mV was obtained between UA and ascorbic acid which is the major interfering substance for UA. The use of Ox-PEDOT-nf/PGE has been successfully tested in the determination of UA in human blood serum and urine samples for the first time in the literature.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
