Modelling spatial and temporal variations in the water quality of an artificial water reservoir in the semiarid Midwest of Argentina

Temporal and spatial patterns of water quality of an important artificial water reservoir located in the semiarid Midwest of Argentina were investigated using chemometric techniques. Surface water samples were collected at 38 points of the water reservoir during eleven sampling campaigns between October 1998 and June 2000, covering the warm wet season and the cold dry season, and analyzed for dissolved oxygen (DO), conductivity, pH, ammonium, nitrate, nitrite, total dissolved solids (TDS), alkalinity, hardness, bicarbonate, chloride, sulfate, calcium, magnesium, fluoride, sodium, potassium, iron, aluminum, silica, phosphate, sulfide, arsenic, chromium, lead, cadmium, chemical oxygen demand (COD), biochemical oxygen demand (BOD), viable aerobic bacteria (VAB) and total coliform bacteria (TC).Concentrations of lead, ammonium, nitrite and coliforms were higher than the maximum allowable limits for drinking water in a large proportion of the water samples. To obtain a general representation of the spatial and temporal trends of the water quality parameters at the reservoir, the three-dimensional dataset (sampling sites × parameters × sampling campaigns) has been analyzed by matrix augmentation principal component analysis (MA-PCA) and N-way principal component analysis (N-PCA) using Tucker3 and PARAFAC (Parallel Factor Analysis) models. MA-PCA produced a component accounting for the general behavior of parameters associated with organic pollution. The Tucker3 models were not appropriate for modelling the water quality dataset. The two-factor PARAFAC model provided the best picture to understand the spatial and temporal variation of the water quality parameters of the reservoir. The first PARAFAC factor contains useful information regarding the relation of organic pollution with seasonality, whereas the second factor also encloses information concerning lead pollution. The most polluted areas in the reservoir and the polluting sources were identified by plotting PARAFAC loadings as a function of the UTM (Universal Transverse Mercator) coordinates.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Water quality of an Argentinean reservoir has been investigated by N-way PCA. ► PARAFAC mode modelled spatial and seasonal variations of water composition. ► Two factors related with organic and lead pollution have been identified. ► The most polluted areas of the reservoir were located, and polluting sources identified.