Article ID Journal Published Year Pages File Type
1167729 Analytica Chimica Acta 2010 8 Pages PDF
Abstract

A method for the determination of uranium and radium isotopes in water samples is proposed. Liquid scintillation techniques were used for collecting alpha spectra, which were then analyzed by fitting the alpha peaks with overlapping Gaussians. The analysis can quantify the observed isotopes with accuracy depending on the activity of each isotope.In order to simulate the peaks with Gaussian normal distribution functions, the centroid of each peak as well as the full width at half maximum (FWHM) are required, as they depend on the quenching of the sample. For this purpose, samples with known activities of 226Ra and its decay products and also of the uranium isotopes 238U and 234U, at various quenching levels, were used to establish the correlation of the peaks’ shift with the quench effect. In addition, the correlation of the FWHM with the centroid of a peak was determined, using the same procedure.Following the above analysis technique, an average of 97 ± 2% of detection efficiency and a lower limit of detection of 8.2 mBq kg−1 for alpha isotopes were achieved.

Related Topics
Physical Sciences and Engineering Chemistry Analytical Chemistry
Authors
, , ,