Optical determination of Cr(VI) using regenerable, functionalized sol–gel monoliths

Transparent, pyridine-functionalized sol–gel monoliths have been formed and their use in Cr(VI) sensing applications is demonstrated. The monoliths were immersed in acidic Cr(VI)-containing solutions, and the Cr(VI) uptake was monitored using UV–vis and atomic absorption spectroscopies. At concentrations at the ppm level, the monoliths exhibit a yellow color change characteristic of Cr(VI) uptake, and this can be measured by monitoring the absorption change at about 350 nm using UV–vis spectroscopy. Concentrations at the ppb level are below the limit of detection using this wavelength of 350 nm for measurement. However, by adding a diphenylcarbazide solution to monoliths that have been previously immersed in ppb-level Cr(VI) solutions, a distinct color change takes place within the gels that can be measured at about 540 nm using UV–vis spectroscopy. Concentrations as low as 10 ppb Cr(VI) can be measured using this method. The monoliths can then be regenerated for subsequent sensing cycles by thorough washing with 6.0 M HCl. The factors affecting monolith uptake of Cr(VI) have been explored. In addition, the gels have been characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) measurements.