Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1273376 | International Journal of Hydrogen Energy | 2010 | 7 Pages |
Heat transfer performance of the natural gas (NG) steam reforming in a reactor bed with metal monolith catalyst has been evaluated in comparison with that in the conventional packed bed with pellet catalysts. 2%Ru/Al2O3 catalyst with high intrinsic activity has been wash-coated on metal monolith substrates or used as it was for the packed bed application. The prepared metal monolith catalyst has been applied for NG steam reforming to increase heat-transfer efficiency. Under the same degree of temperature gradient from the furnace wall to the catalyst bed, the heat flux obtained in the monolithic bed reactor was about twice higher than that in the packed bed reactor. Maximum heat transfer coefficient achieved in this study for the former was 0.65 kW/m2 K, while that for the latter was 0.3 kW/m2 K. This is mainly due to enhanced heat-transfer via metal monolith catalyst.