Composite-alumina-carbon molecular sieve membranes prepared from novolac resin and boehmite. Part I: Preparation, characterization and gas permeation studies

•Composite-carbon molecular sieve membranes were developed and characterized for gas separation.•In house novolac phenolic resin was prepared.•Coating solution was prepared from novolac with boehmite nanoparticles and curing reactants.•Supported c-CMSM were prepared in a single coating-drying-carbonization step.•c-CMSM show good H2 permeation and selectivity comparable to Pd membranes at low temperature, less than 100 °C.

Supported composite alumina-carbon molecular sieve membranes (c-CMSM) were prepared from in house prepared novolac phenolic resin loaded with boehmite nanoparticles in a single dipping-drying-carbonization step. A porous α-alumina tube support was dipped into a N-methyl-2-pyrrolidone solution containing polymerized novolac resin loaded with boehmite, subsequently dried at 100 °C and carbonized at 500 °C under nitrogen environment. The structure, morphology and performance of the membranes were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), carbon dioxide adsorption and permeation of N2, O2, He, H2 and CO2. SEM showed carbon membranes with a thin and very uniform layer with a thickness of ca. 3 μm CO2 adsorption isotherms indicated that the produced carbon membranes presented a microporous structure. The c-CMSM exhibited good gas separation properties. The permselectivity surpass the Robeson upper bound for polymeric membranes, especially regarding ideal permselectivities of pairs H2/N2 = 117, and He/O2 = 49. Aging effects were observed after membrane exposure to ambient air. However with a thermal treatment under nitrogen atmosphere the permeance of nitrogen increases.