Well-to-Wheels analysis of hydrogen production from bio-oil reforming for use in internal combustion engines

The environmental profile of hydrogen depends greatly on the nature of the feedstock and the production process. In this Well-to-Wheels (WTW) study, the environmental impacts of hydrogen production from lignocellulosic biomass via pyrolysis and subsequent steam reforming of bio-oil were evaluated and compared to the conventional production of hydrogen from natural gas steam reforming. Hydrogen was assumed to be used as transportation fuel in an internal combustion engine vehicle. Two scenarios for the provision of lignocellulosic biomass were considered: wood waste and dedicated willow cultivation. The WTW analysis showed that the production of bio-hydrogen consumes less fossil energy in the total lifecycle, mainly due to the renewable nature of the fuel that results in zero energy consumption in the combustion step. The total (fossil and renewable) energy demand is however higher compared to fossil hydrogen, due to the higher process energy demands and methanol used to stabilize bio-oil. Improvements could occur if these are sourced from renewable energy sources. The overall benefit of using a CO2 neutral renewable feedstock for the production of hydrogen is unquestionable. In terms of global warming, production of hydrogen from biomass through pyrolysis and reforming results in major GHG emissions, ranging from 40% to 50%, depending on the biomass source. The use of cultivated biomass aggravates the GHG emissions balance, mainly due to the N2O emissions at the cultivation step.

► LCA of hydrogen produced from biomass from biomass via pyrolysis and reforming. ► Hydrogen from biomass results in major GHG emission savings (40–50%). ► Bio-hydrogen lifecycle consumes less fossil energy than hydrogen from natural gas. ► Total (fossil and renewable) energy demand is higher compared to fossil hydrogen.