Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1276095 | International Journal of Hydrogen Energy | 2012 | 11 Pages |
Typical compressed air energy storage (CAES) based gas turbine plant operates on natural gas or fuel oils as fuel for its operation. However, the use of hydro-carbon fuels will contribute to carbon emissions leading to pollution of the environment. On the other hand, the use of hydrogen as fuel for the gas turbine will eliminate the carbon emissions leading to a cleaner environment. Hydrogen can be produced using renewable energy sources like wind, solar etc. Storage of hydrogen is a bottleneck for such a system. A high capacity sodium alanate metal hydride bed is used in this study to store the hydrogen. The dynamics of the CAES based gas turbine plant operating with hydrogen fuel is presented along with discharge dynamics of the metal hydride bed. The heat required for desorbing the hydrogen from the metal hydride bed is provided partly by the hot flue gas exiting from the low pressure turbine and partly by external heating. Thus some of the heat from the flue gas is extracted. A novel multiple bed strategy is employed for efficient desorption. Each bed consists of a shell and tube, with alanate in the shell and heating fluid flowing through the helical coiled tube. Hydrogen combustor is modeled using a simplified Continuous Stirred Tank Reactor (CSTR) assumption in CANTERA. The NOx emissions in the low pressure turbine exhaust stream are presented.
► Compressed air energy storage (CAES). ► Hydrogen fueled gas turbine plant. ► Sodium alanate hydrogen storage. ► Continuous stirred tank reactor (CSTR). ► NOx emission.