Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1276665 | International Journal of Hydrogen Energy | 2012 | 8 Pages |
An oxygen diffusion cathode for a PEMFC has been prepared by directly depositing the catalyst (pure Pd) on a carbon paper support containing 5% of PTFE through an electroless deposition method. A very low-Pd loading of 0.04 mgPd cm−2 and a higher one, containing 0.22 mgPd cm−2, were obtained. Two different experimental approaches were used to evaluate their catalytic activity towards the oxygen reduction reaction. The overall results revealed that the prepared catalysts exhibit a high catalytic activity, but a low efficiency on the catalyst utilization.PEMFC tests, carried out in a single cell, showed the feasibility of using the novel procedure on the preparation of oxygen diffusion cathodes, and its similar performance to a conventional one prepared by spraying the catalyst ink (Pt black) on a carbon paper support.
► A novel procedure to prepare oxygen diffusion cathode of Pd supported on a carbon paper was developed. ► The catalytic activity is comparable to Pt but shows a low efficiency. ► PEMFC tests showed a good performance on a MEA containing high Pd load.