Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells

The delamination behavior of La0.8Sr0.2MnO3 (LSM) oxygen electrode of solid oxide electrolysis cell (SOEC) is studied in detail under anodic current passage of 500 mA cm−2 and 800 °C. The delamination or failure of LSM oxygen electrode is observed after the current passage treatment for 48 h, and is accompanied by the significant increase in the electrode polarization and ohmic resistances. The delaminated electrode and electrolyte interface is characterized by the formation of nanoparticles within LSM contact rings on the electrolyte surface. SEM analysis of the interface at different stages of the polarization indicates that the formation of these nanoparticles is caused by the localized disintegration of the LSM grains at the electrode/electrolyte interface. The formation of nanoparticles is most likely due to the migration or incorporation of oxygen ions from the YSZ electrolyte into the LSM grain, leading to the shrinkage of LSM lattice. The shrinkage of the LSM lattice will create local tensile strains, resulting in the microcrack and subsequent formation of nanoparticles within LSM particles at the electrode/electrolyte interface. The formation of nanoparticle clusters weakens the anode/electrolyte interface, eventually leading to the delamination and failure of the LSM oxygen electrode under high internal partial pressure of oxygen at the interface.

► Delamination process of LSM oxygen electrode of SOEC is studied for the first time. ► Polarization behavior for O2 evolution is characterized by three regions. ► Nanoparticles were formed at the electrode/electrolyte interface. ► Nanoparticle formation is due to local tensile-strain induced microcrack. ► A delamination mechanism of LSM oxygen electrodes of SOEC is proposed.