Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1278234 | International Journal of Hydrogen Energy | 2008 | 13 Pages |
This paper examines selected design issues associated with reactor scale-up in the thermochemical copper–chlorine (Cu–Cl) cycle of hydrogen production. The thermochemical cycle decomposes water into oxygen and hydrogen, through intermediate copper and chlorine compounds. In this paper, emphasis is focused on the hydrogen, oxygen and hydrolysis reactors. A sedimentation cell for copper separation and HCl gas absorption tower are discussed for the thermochemical hydrogen reactor. A molten salt reactor is investigated for decomposition of an intermediate compound, copper oxychloride (CuO·Cl2), into oxygen gas and molten cuprous chloride. Scale-up design issues are examined for handling three phases within the molten salt reactor, i.e., solid copper oxychloride particles, liquid (melting salt) and exiting gas (oxygen). Also, different variations of hydrolysis reactions are compared, including 5, 3 and 2-step Cu–Cl cycles that utilize reactive spray drying, instead of separate drying and hydrolysis processes. The spray drying involves evaporation of aqueous feed by mixing the spray and drying streams. Results are presented for the required capacities of feed materials for the multiphase reactors, steam and heat requirements, and other key design parameters for reactor scale-up to a pilot-scale capacity.