| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1278879 | International Journal of Hydrogen Energy | 2011 | 5 Pages |
Hydrogen was produced via electrolysis of aqueous formic acid solutions, and the effects of the concentrations of formic acid and NaOH on the electrolytic voltage were systematically investigated. The voltage is found to be related to the actual formic acid concentration. When the actual formic acid concentration is higher than 0.8 × 10−9 M, the initial electrolytic voltage can be as low as 0.30 V, which is much lower than the open circuit voltage in a proton exchange membrane fuel cell. The electrolytic voltage increases with the increase of the current density. Specifically at 1.0 M NaOH and 4.0 M HCOOH, the steady voltage value increases from 0.62 to 0.70 V as the current density increases from 1.0 to 6.0 mA/cm2. At 3.0 M HCOOH and 2.5 M NaOH, the hydrogen production rate is 53 μmol/h under 8.0 mA/cm2, which is promising for practical industrial-scale hydrogen production.
► Production of hydrogen via electrolysis of aqueous formic acid solutions is described. ► The initial electrolytic voltage for formic acid solution can be as low as 0.30 V, which is much lower than those for water, methanol and ethanol. ► The electrolytic voltage increases with the increase of the current density. ► At 3.0 M HCOOH and 2.5 M NaOH, the hydrogen production rate is 53 μmol/h under 8.0 mA/cm2, which is promising for practical industrial-scale hydrogen production.
