Hydrogenation of carbon monoxide over cobalt nanoparticles supported on carbon nanotubes

This paper describes a catalytic reaction of hydrogen and carbon monoxide (Fischer–Tropsch synthesis (FTS)) over carbon nanotubes (CNTs) supported cobalt nanoparticles. We have investigated the effect of calcination of the catalysts on FTS performance using X-ray diffraction (XRD), H2 chemisorption, temperature programmed reduction (TPR), temperature programmed oxidation (TPO), and transmission electron microscopy (TEM) techniques. With the increase of outer diameter of CNTs, specific surface area of the catalyst decreases while Co particle size increased accompanying with a decrease in CO conversion. The FTS performance is similar for samples calcined in N2 or air at temperature below 550 °C. Over 550 °C, the results are much different in that the Co/CNTs can keep its activity due to the unchanged CNTs structure in N2 while the Co/CNTs almost lose activity owing to the loss of CNTs structure and sintering of cobalt oxide clusters in air.

► Calcination temperature and ambient condition determine the surface morphology and reactivity of Co/CNTs catalysts. ► The diameter of CNTs and size of Co particles influence CO conversion and selectivity to CH4 and C5+ molecules. ► Calcination in nitrogen atmosphere is favorable for the preparation of CNTs-based catalyst for hydrogenation of CO.