Applications of nano-composite materials for improving the performance of anode-supported electrolytes of SOFCs

In order to improve the performance of the anode-supported electrolyte of solid oxide fuel cells (SOFCs), the anode electrode is modified by inserting an anode functional layer of nano-composite powders between a Ni–YSZ electrode and YSZ electrolyte. The NiO–YSZ nano-composite powders are fabricated by coating nano-sized Ni and YSZ particles on the YSZ core particle by the Pechini process. The reduction of the polarization resistance of a single cell that is applied to the anode functional layer is attributed to the increasing reaction of three-phase boundaries (TPBs) within the layer and the micro-structured uniformity in the electrode. Two methods were used, namely tape-casting/dip-coating and tape-casting/co-firing, for studying the performance. It can be concluded that the cell with an anode functional layer thickness (15–20 μm) and a microstructure of NiO–YSZ nano-composite materials which was fabricated by the tape-casting/dip-coating method improved the output power (to 1.3 W cm−2) at 800 °C using hydrogen as fuel and air as an oxidant.